External Wall Finishes

Pre-panelised loadbearing external wall panels

Designed to accommodate various external wall finishes

Brick Clad

The Sigmat pre-panelised loadbearing wall forms part of an installation-ready cavity wall system prior to the addition of a single outer leaf of brickwork. The system is supplied with vertical stainless steel brick tie channels and rigid foil-faced urethane insulation, with variable thickness to suit the building's required U-value. It is pre-assembled off-site in our factory to enhance quality, speed and safety.

All Sigmat panels are designed to include pre-formed door and window openings and inner face is ready for the direct application of plasterboard lining finishes.

Ventilated Rainscreen

Sigmat pre-panelised loadbearing external wall panels are designed to receive a ventilated rainscreen cladding system, installed by specialists to suit the client's specification.

Our pre-panelised external wall panels are clad on the outer face with a 12mm thick calcium silicate carrier board to receive helping hand brackets, insulation, sub-grid support systems and cladding. All are supplied and installed by the cladding specialist.

Insulated Render

Sigmat pre-panelised loadbearing external wall panels are clad on the outer face with a 12mm thick calcium silicate carrier broad to receive the render rail support system, insulation and thin coat render finish. All are supplied and installed by the render specialist.

All Sigmat panels are designed to include pre-formed door and window openings and inner face is ready for the direct application of plasterboard linings and finishes. 

Timber Clad

Sigmat pre-panelised loadbearing external wall panels are clad on the outer face with a 12mm thick calcium silicate carrier board to receive foil-faced insulation, time ber sub-grid and timber cladding. All are supplied and installed by the cladding specialist.

If required, the insulation ca also be installed as part of the off-site panel assembly process. All Simgat panels include pre-formed door and window openings and the inner face is ready for the direct application of plasterboard linings and finishes. This system can also be adopted for specialist zinc or copper cladding systems.

Composite Panel

The composite panel insulation core thickness can be varied to suit the building's required U-value. All Sigmat panels include pre-formed door and window openings and the inner face is ready for the direct application of plasterboard linings and finishes.

Contact Us